Manufacturer of Laboratory equipment, physics lab, biology lab ,math lab ,chemistry lab ,science lab, laboratory testing equipment, Laboratory Glassware, Laboratory equipment suppliers, lab equipment manufacturers, general laboratory equipment manufacturers, laboratory equipment wholesale, laboratory equipment wholesalers, laboratory equipment, lab equipment, general laboratory equipment, science lab equipment, laboratory testing equipment, general laboratory equipment suppliers, general laboratory equipment exporter
Address: 1101/1,GYAN MARG,BEHIND S.D PUBLIC SCHOOL,AMBALA CANTT , Ambala Cantt - , India
Phone: 91-99966-9996674444
Fax:9996674444

Equipment summary£º RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others. Main function: This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc. Main features: 1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission. 2. The whole control system is safe and high reliability. 3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves. 4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves. 5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves. 6. Has limit protection, overload protection, emergency stop and other safe protective functions. Applicable industry: It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested.. Technical parameters: Model RT-201A Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional ) Accurate grade 1grade / 0.5 grade Effective measuring range Force from 0.2% to 100% / from 0.4% to 100% Measuring accuracy the value ¡À1% / the value ¡À0.5% Tester resolution Max load: 1/200000, constant the resolution Load sensor Basic configuration sensor max load: one Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement ) Testing speed From 0.001 to 500mm/min Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2% Safety Electronic-limit protection Testing platform moving device Fast /slow( two speeds to control ),can jog Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation Overload protection Overload 10%, automatic protection fixture A set of tensile clamp Machine size 45x58x135cm (L*W*H) Motor Delta AC servo motor and drive Power supply 220V , 50HZ or according to the requirement Power 0.4KW ( depending on different demand of force,using different motor) weight About 75KG Unit KG,N,LB, TON can be exchanged.
Address: Rampur Road, Behind Uttranchal Gramin Bank , Roorkee - , India
Phone: 91-9758855780

Equipment summary£º RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others. Main function: This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc. Main features: 1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission. 2. The whole control system is safe and high reliability. 3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves. 4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves. 5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves. 6. Has limit protection, overload protection, emergency stop and other safe protective functions. Applicable industry: It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested.. Technical parameters: Model RT-201A Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional ) Accurate grade 1grade / 0.5 grade Effective measuring range Force from 0.2% to 100% / from 0.4% to 100% Measuring accuracy the value ¡À1% / the value ¡À0.5% Tester resolution Max load: 1/200000, constant the resolution Load sensor Basic configuration sensor max load: one Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement ) Testing speed From 0.001 to 500mm/min Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2% Safety Electronic-limit protection Testing platform moving device Fast /slow( two speeds to control ),can jog Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation Overload protection Overload 10%, automatic protection fixture A set of tensile clamp Machine size 45x58x135cm (L*W*H) Motor Delta AC servo motor and drive Power supply 220V , 50HZ or according to the requirement Power 0.4KW ( depending on different demand of force,using different motor) weight About 75KG Unit KG,N,LB, TON can be exchanged.
Address: 713, Ansals Chamber-ii, 6, Bhikaiji Cama Place , Delhi - , India
Phone: 91-11-26178426
Fax:91-11-26191953

Equipment summary£º RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others. Main function: This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc. Main features: 1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission. 2. The whole control system is safe and high reliability. 3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves. 4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves. 5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves. 6. Has limit protection, overload protection, emergency stop and other safe protective functions. Applicable industry: It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested.. Technical parameters: Model RT-201A Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional ) Accurate grade 1grade / 0.5 grade Effective measuring range Force from 0.2% to 100% / from 0.4% to 100% Measuring accuracy the value ¡À1% / the value ¡À0.5% Tester resolution Max load: 1/200000, constant the resolution Load sensor Basic configuration sensor max load: one Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement ) Testing speed From 0.001 to 500mm/min Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2% Safety Electronic-limit protection Testing platform moving device Fast /slow( two speeds to control ),can jog Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation Overload protection Overload 10%, automatic protection fixture A set of tensile clamp Machine size 45x58x135cm (L*W*H) Motor Delta AC servo motor and drive Power supply 220V , 50HZ or according to the requirement Power 0.4KW ( depending on different demand of force,using different motor) weight About 75KG Unit KG,N,LB, TON can be exchanged.
Address: 108-ABC Complex, Veer Sarvarkar Block, Shakarpur , Delhi - , India
Phone: (91)-(11)-22504355

Equipment summary£º RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others. Main function: This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc. Main features: 1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission. 2. The whole control system is safe and high reliability. 3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves. 4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves. 5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves. 6. Has limit protection, overload protection, emergency stop and other safe protective functions. Applicable industry: It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested.. Technical parameters: Model RT-201A Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional ) Accurate grade 1grade / 0.5 grade Effective measuring range Force from 0.2% to 100% / from 0.4% to 100% Measuring accuracy the value ¡À1% / the value ¡À0.5% Tester resolution Max load: 1/200000, constant the resolution Load sensor Basic configuration sensor max load: one Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement ) Testing speed From 0.001 to 500mm/min Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2% Safety Electronic-limit protection Testing platform moving device Fast /slow( two speeds to control ),can jog Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation Overload protection Overload 10%, automatic protection fixture A set of tensile clamp Machine size 45x58x135cm (L*W*H) Motor Delta AC servo motor and drive Power supply 220V , 50HZ or according to the requirement Power 0.4KW ( depending on different demand of force,using different motor) weight About 75KG Unit KG,N,LB, TON can be exchanged.
Address: 1065 Easton Road , Horsham - , United States
Phone: 1-215-675 7100

Equipment summary£º RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others. Main function: This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc. Main features: 1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission. 2. The whole control system is safe and high reliability. 3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves. 4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves. 5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves. 6. Has limit protection, overload protection, emergency stop and other safe protective functions. Applicable industry: It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested.. Technical parameters: Model RT-201A Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional ) Accurate grade 1grade / 0.5 grade Effective measuring range Force from 0.2% to 100% / from 0.4% to 100% Measuring accuracy the value ¡À1% / the value ¡À0.5% Tester resolution Max load: 1/200000, constant the resolution Load sensor Basic configuration sensor max load: one Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement ) Testing speed From 0.001 to 500mm/min Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2% Safety Electronic-limit protection Testing platform moving device Fast /slow( two speeds to control ),can jog Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation Overload protection Overload 10%, automatic protection fixture A set of tensile clamp Machine size 45x58x135cm (L*W*H) Motor Delta AC servo motor and drive Power supply 220V , 50HZ or according to the requirement Power 0.4KW ( depending on different demand of force,using different motor) weight About 75KG Unit KG,N,LB, TON can be exchanged.
Address: P B No 30 E Class, Pratap Nagar Industrial Area , Udaipur - , India
Phone: 91-294-2123278
Fax:91-294-2492513

Equipment summary£º RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others. Main function: This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc. Main features: 1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission. 2. The whole control system is safe and high reliability. 3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves. 4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves. 5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves. 6. Has limit protection, overload protection, emergency stop and other safe protective functions. Applicable industry: It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested.. Technical parameters: Model RT-201A Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional ) Accurate grade 1grade / 0.5 grade Effective measuring range Force from 0.2% to 100% / from 0.4% to 100% Measuring accuracy the value ¡À1% / the value ¡À0.5% Tester resolution Max load: 1/200000, constant the resolution Load sensor Basic configuration sensor max load: one Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement ) Testing speed From 0.001 to 500mm/min Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2% Safety Electronic-limit protection Testing platform moving device Fast /slow( two speeds to control ),can jog Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation Overload protection Overload 10%, automatic protection fixture A set of tensile clamp Machine size 45x58x135cm (L*W*H) Motor Delta AC servo motor and drive Power supply 220V , 50HZ or according to the requirement Power 0.4KW ( depending on different demand of force,using different motor) weight About 75KG Unit KG,N,LB, TON can be exchanged.
Address: B27H Yangguang Haijing, No.16 Gaoxin C. Ave. 4th., Nanshan Shenzhen , Shenzhen - , China
Phone: 26737779
Fax:26737507

Equipment summary£º RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others. Main function: This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc. Main features: 1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission. 2. The whole control system is safe and high reliability. 3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves. 4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves. 5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves. 6. Has limit protection, overload protection, emergency stop and other safe protective functions. Applicable industry: It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested.. Technical parameters: Model RT-201A Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional ) Accurate grade 1grade / 0.5 grade Effective measuring range Force from 0.2% to 100% / from 0.4% to 100% Measuring accuracy the value ¡À1% / the value ¡À0.5% Tester resolution Max load: 1/200000, constant the resolution Load sensor Basic configuration sensor max load: one Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement ) Testing speed From 0.001 to 500mm/min Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2% Safety Electronic-limit protection Testing platform moving device Fast /slow( two speeds to control ),can jog Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation Overload protection Overload 10%, automatic protection fixture A set of tensile clamp Machine size 45x58x135cm (L*W*H) Motor Delta AC servo motor and drive Power supply 220V , 50HZ or according to the requirement Power 0.4KW ( depending on different demand of force,using different motor) weight About 75KG Unit KG,N,LB, TON can be exchanged.
Address: 5/5th Floor, K. B. Commercial Centre , Ahmedabad - , India
Phone: 91-79-5507758
Fax:91-79-5507758

Equipment summary£º RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others. Main function: This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc. Main features: 1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission. 2. The whole control system is safe and high reliability. 3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves. 4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves. 5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves. 6. Has limit protection, overload protection, emergency stop and other safe protective functions. Applicable industry: It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested.. Technical parameters: Model RT-201A Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional ) Accurate grade 1grade / 0.5 grade Effective measuring range Force from 0.2% to 100% / from 0.4% to 100% Measuring accuracy the value ¡À1% / the value ¡À0.5% Tester resolution Max load: 1/200000, constant the resolution Load sensor Basic configuration sensor max load: one Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement ) Testing speed From 0.001 to 500mm/min Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2% Safety Electronic-limit protection Testing platform moving device Fast /slow( two speeds to control ),can jog Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation Overload protection Overload 10%, automatic protection fixture A set of tensile clamp Machine size 45x58x135cm (L*W*H) Motor Delta AC servo motor and drive Power supply 220V , 50HZ or according to the requirement Power 0.4KW ( depending on different demand of force,using different motor) weight About 75KG Unit KG,N,LB, TON can be exchanged.
Address: Plot No 7/2, Street No 7 Anand Parbat Industrial Area , Delhi - , India
Phone: 91-11-25435746
Fax:91-11-25731735

Equipment summary£º RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others. Main function: This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc. Main features: 1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission. 2. The whole control system is safe and high reliability. 3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves. 4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves. 5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves. 6. Has limit protection, overload protection, emergency stop and other safe protective functions. Applicable industry: It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested.. Technical parameters: Model RT-201A Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional ) Accurate grade 1grade / 0.5 grade Effective measuring range Force from 0.2% to 100% / from 0.4% to 100% Measuring accuracy the value ¡À1% / the value ¡À0.5% Tester resolution Max load: 1/200000, constant the resolution Load sensor Basic configuration sensor max load: one Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement ) Testing speed From 0.001 to 500mm/min Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2% Safety Electronic-limit protection Testing platform moving device Fast /slow( two speeds to control ),can jog Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation Overload protection Overload 10%, automatic protection fixture A set of tensile clamp Machine size 45x58x135cm (L*W*H) Motor Delta AC servo motor and drive Power supply 220V , 50HZ or according to the requirement Power 0.4KW ( depending on different demand of force,using different motor) weight About 75KG Unit KG,N,LB, TON can be exchanged.
Address: Precision House, 98A/17, Hadapsar Indl. Estate , Pune - , India
Phone: 91-212-6870567
Fax:91-212-6875383

Engaged in manufacturer and exporting of colored borosilicate glass, tubing and rods, industrial & laboratory instruments.
Address: 2901,#7,Tianchangyuan,Media Village,Hongjunying South Rd,Chaoyang District, Beijing City , Chaoyang - , China
Phone: 86-10-84829094
Fax:86-10-82084632

Equipment summary£º RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others. Main function: This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc. Main features: 1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission. 2. The whole control system is safe and high reliability. 3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves. 4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves. 5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves. 6. Has limit protection, overload protection, emergency stop and other safe protective functions. Applicable industry: It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested.. Technical parameters: Model RT-201A Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional ) Accurate grade 1grade / 0.5 grade Effective measuring range Force from 0.2% to 100% / from 0.4% to 100% Measuring accuracy the value ¡À1% / the value ¡À0.5% Tester resolution Max load: 1/200000, constant the resolution Load sensor Basic configuration sensor max load: one Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement ) Testing speed From 0.001 to 500mm/min Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2% Safety Electronic-limit protection Testing platform moving device Fast /slow( two speeds to control ),can jog Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation Overload protection Overload 10%, automatic protection fixture A set of tensile clamp Machine size 45x58x135cm (L*W*H) Motor Delta AC servo motor and drive Power supply 220V , 50HZ or according to the requirement Power 0.4KW ( depending on different demand of force,using different motor) weight About 75KG Unit KG,N,LB, TON can be exchanged.
Address: 6, Rani Jhansi Road, Motia Khan , Delhi - , India
Phone: 23521188/23534863/23683021/55449988
Fax:23534863

Equipment summary£º RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others. Main function: This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc. Main features: 1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission. 2. The whole control system is safe and high reliability. 3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves. 4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves. 5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves. 6. Has limit protection, overload protection, emergency stop and other safe protective functions. Applicable industry: It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested.. Technical parameters: Model RT-201A Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional ) Accurate grade 1grade / 0.5 grade Effective measuring range Force from 0.2% to 100% / from 0.4% to 100% Measuring accuracy the value ¡À1% / the value ¡À0.5% Tester resolution Max load: 1/200000, constant the resolution Load sensor Basic configuration sensor max load: one Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement ) Testing speed From 0.001 to 500mm/min Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2% Safety Electronic-limit protection Testing platform moving device Fast /slow( two speeds to control ),can jog Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation Overload protection Overload 10%, automatic protection fixture A set of tensile clamp Machine size 45x58x135cm (L*W*H) Motor Delta AC servo motor and drive Power supply 220V , 50HZ or according to the requirement Power 0.4KW ( depending on different demand of force,using different motor) weight About 75KG Unit KG,N,LB, TON can be exchanged.
Address: New.No 3, Appaiar Lane, Second Floor Royapuram , Chennai - , India
Phone: 52173177

Equipment summary£º RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others. Main function: This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc. Main features: 1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission. 2. The whole control system is safe and high reliability. 3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves. 4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves. 5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves. 6. Has limit protection, overload protection, emergency stop and other safe protective functions. Applicable industry: It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested.. Technical parameters: Model RT-201A Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional ) Accurate grade 1grade / 0.5 grade Effective measuring range Force from 0.2% to 100% / from 0.4% to 100% Measuring accuracy the value ¡À1% / the value ¡À0.5% Tester resolution Max load: 1/200000, constant the resolution Load sensor Basic configuration sensor max load: one Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement ) Testing speed From 0.001 to 500mm/min Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2% Safety Electronic-limit protection Testing platform moving device Fast /slow( two speeds to control ),can jog Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation Overload protection Overload 10%, automatic protection fixture A set of tensile clamp Machine size 45x58x135cm (L*W*H) Motor Delta AC servo motor and drive Power supply 220V , 50HZ or according to the requirement Power 0.4KW ( depending on different demand of force,using different motor) weight About 75KG Unit KG,N,LB, TON can be exchanged.
Address: 15, 2nd Floor, B Wing, Kamal Kunj, Megha Co-op. Hsg. Soc. Ltd., S.V. Road, Irla Bridge, Andheri (West) , Mumbai - , India
Phone: 26714120
Fax:26717475

Equipment summary£º RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others. Main function: This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc. Main features: 1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission. 2. The whole control system is safe and high reliability. 3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves. 4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves. 5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves. 6. Has limit protection, overload protection, emergency stop and other safe protective functions. Applicable industry: It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested.. Technical parameters: Model RT-201A Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional ) Accurate grade 1grade / 0.5 grade Effective measuring range Force from 0.2% to 100% / from 0.4% to 100% Measuring accuracy the value ¡À1% / the value ¡À0.5% Tester resolution Max load: 1/200000, constant the resolution Load sensor Basic configuration sensor max load: one Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement ) Testing speed From 0.001 to 500mm/min Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2% Safety Electronic-limit protection Testing platform moving device Fast /slow( two speeds to control ),can jog Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation Overload protection Overload 10%, automatic protection fixture A set of tensile clamp Machine size 45x58x135cm (L*W*H) Motor Delta AC servo motor and drive Power supply 220V , 50HZ or according to the requirement Power 0.4KW ( depending on different demand of force,using different motor) weight About 75KG Unit KG,N,LB, TON can be exchanged.
Address: 143-B, Govt. Industrial Est., Kandivali (West) , Mumbai - , India
Phone: 91-22-8682765
Fax:91-22-28684428

Equipment summary£º RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others. Main function: This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc. Main features: 1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission. 2. The whole control system is safe and high reliability. 3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves. 4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves. 5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves. 6. Has limit protection, overload protection, emergency stop and other safe protective functions. Applicable industry: It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested.. Technical parameters: Model RT-201A Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional ) Accurate grade 1grade / 0.5 grade Effective measuring range Force from 0.2% to 100% / from 0.4% to 100% Measuring accuracy the value ¡À1% / the value ¡À0.5% Tester resolution Max load: 1/200000, constant the resolution Load sensor Basic configuration sensor max load: one Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement ) Testing speed From 0.001 to 500mm/min Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2% Safety Electronic-limit protection Testing platform moving device Fast /slow( two speeds to control ),can jog Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation Overload protection Overload 10%, automatic protection fixture A set of tensile clamp Machine size 45x58x135cm (L*W*H) Motor Delta AC servo motor and drive Power supply 220V , 50HZ or according to the requirement Power 0.4KW ( depending on different demand of force,using different motor) weight About 75KG Unit KG,N,LB, TON can be exchanged.
Address: 50, Nagdevi Cross Lane , Mumbai - , India
Phone: 91-22-3421326
Fax:91-22-3401933

We are manufacturer & exporters of high quality medical equipments, surgical, dental instruments & manicure implements, hospitals holloware, eyes instruments, optical instruments. orthopedic, orthodontic instruments, diagnostic instruments, pathological ophthalmology instrument tc instruments, jewelry pliers and all sorts of scissors and tweezers etc.
Address: New Miana Pura West, Roras Road , Sialkot - , Pakistan
Phone: 9252-52-3254581
Fax:92-52-3253694

Equipment summary£º RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others. Main function: This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc. Main features: 1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission. 2. The whole control system is safe and high reliability. 3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves. 4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves. 5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves. 6. Has limit protection, overload protection, emergency stop and other safe protective functions. Applicable industry: It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested.. Technical parameters: Model RT-201A Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional ) Accurate grade 1grade / 0.5 grade Effective measuring range Force from 0.2% to 100% / from 0.4% to 100% Measuring accuracy the value ¡À1% / the value ¡À0.5% Tester resolution Max load: 1/200000, constant the resolution Load sensor Basic configuration sensor max load: one Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement ) Testing speed From 0.001 to 500mm/min Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2% Safety Electronic-limit protection Testing platform moving device Fast /slow( two speeds to control ),can jog Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation Overload protection Overload 10%, automatic protection fixture A set of tensile clamp Machine size 45x58x135cm (L*W*H) Motor Delta AC servo motor and drive Power supply 220V , 50HZ or according to the requirement Power 0.4KW ( depending on different demand of force,using different motor) weight About 75KG Unit KG,N,LB, TON can be exchanged.
Address: 52, Janpath , Delhi - , India
Phone: 91-11-3324769
Fax:91-11-3324769

Equipment summary£º RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others. Main function: This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc. Main features: 1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission. 2. The whole control system is safe and high reliability. 3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves. 4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves. 5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves. 6. Has limit protection, overload protection, emergency stop and other safe protective functions. Applicable industry: It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested.. Technical parameters: Model RT-201A Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional ) Accurate grade 1grade / 0.5 grade Effective measuring range Force from 0.2% to 100% / from 0.4% to 100% Measuring accuracy the value ¡À1% / the value ¡À0.5% Tester resolution Max load: 1/200000, constant the resolution Load sensor Basic configuration sensor max load: one Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement ) Testing speed From 0.001 to 500mm/min Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2% Safety Electronic-limit protection Testing platform moving device Fast /slow( two speeds to control ),can jog Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation Overload protection Overload 10%, automatic protection fixture A set of tensile clamp Machine size 45x58x135cm (L*W*H) Motor Delta AC servo motor and drive Power supply 220V , 50HZ or according to the requirement Power 0.4KW ( depending on different demand of force,using different motor) weight About 75KG Unit KG,N,LB, TON can be exchanged.
Address: 137, BRB Basu Road (1st Floor) , Delhi - , India
Phone: 91-33-2103084
Fax:91-33-2432362

Equipment summary£º RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others. Main function: This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc. Main features: 1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission. 2. The whole control system is safe and high reliability. 3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves. 4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves. 5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves. 6. Has limit protection, overload protection, emergency stop and other safe protective functions. Applicable industry: It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested.. Technical parameters: Model RT-201A Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional ) Accurate grade 1grade / 0.5 grade Effective measuring range Force from 0.2% to 100% / from 0.4% to 100% Measuring accuracy the value ¡À1% / the value ¡À0.5% Tester resolution Max load: 1/200000, constant the resolution Load sensor Basic configuration sensor max load: one Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement ) Testing speed From 0.001 to 500mm/min Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2% Safety Electronic-limit protection Testing platform moving device Fast /slow( two speeds to control ),can jog Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation Overload protection Overload 10%, automatic protection fixture A set of tensile clamp Machine size 45x58x135cm (L*W*H) Motor Delta AC servo motor and drive Power supply 220V , 50HZ or according to the requirement Power 0.4KW ( depending on different demand of force,using different motor) weight About 75KG Unit KG,N,LB, TON can be exchanged.
Address: 41 - 42 Patel Nagar , Ambala - , India
Phone: 2801992
Fax:2800896

Equipment summary£º RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others. Main function: This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc. Main features: 1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission. 2. The whole control system is safe and high reliability. 3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves. 4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves. 5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves. 6. Has limit protection, overload protection, emergency stop and other safe protective functions. Applicable industry: It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested.. Technical parameters: Model RT-201A Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional ) Accurate grade 1grade / 0.5 grade Effective measuring range Force from 0.2% to 100% / from 0.4% to 100% Measuring accuracy the value ¡À1% / the value ¡À0.5% Tester resolution Max load: 1/200000, constant the resolution Load sensor Basic configuration sensor max load: one Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement ) Testing speed From 0.001 to 500mm/min Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2% Safety Electronic-limit protection Testing platform moving device Fast /slow( two speeds to control ),can jog Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation Overload protection Overload 10%, automatic protection fixture A set of tensile clamp Machine size 45x58x135cm (L*W*H) Motor Delta AC servo motor and drive Power supply 220V , 50HZ or according to the requirement Power 0.4KW ( depending on different demand of force,using different motor) weight About 75KG Unit KG,N,LB, TON can be exchanged.
Address: Vanbey Business Centre, 152, Greams Road , Chennai - , India
Phone: 26711195
Fax:28294336

Equipment summary£º RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others. Main function: This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc. Main features: 1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission. 2. The whole control system is safe and high reliability. 3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves. 4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves. 5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves. 6. Has limit protection, overload protection, emergency stop and other safe protective functions. Applicable industry: It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested.. Technical parameters: Model RT-201A Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional ) Accurate grade 1grade / 0.5 grade Effective measuring range Force from 0.2% to 100% / from 0.4% to 100% Measuring accuracy the value ¡À1% / the value ¡À0.5% Tester resolution Max load: 1/200000, constant the resolution Load sensor Basic configuration sensor max load: one Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement ) Testing speed From 0.001 to 500mm/min Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2% Safety Electronic-limit protection Testing platform moving device Fast /slow( two speeds to control ),can jog Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation Overload protection Overload 10%, automatic protection fixture A set of tensile clamp Machine size 45x58x135cm (L*W*H) Motor Delta AC servo motor and drive Power supply 220V , 50HZ or according to the requirement Power 0.4KW ( depending on different demand of force,using different motor) weight About 75KG Unit KG,N,LB, TON can be exchanged.
Address: LCGC Towers, 161/166, Paigah Colony , Seceundrabad - , India
Phone: 55315242
Fax:55329000

Equipment summary£º RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others. Main function: This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc. Main features: 1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission. 2. The whole control system is safe and high reliability. 3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves. 4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves. 5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves. 6. Has limit protection, overload protection, emergency stop and other safe protective functions. Applicable industry: It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested.. Technical parameters: Model RT-201A Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional ) Accurate grade 1grade / 0.5 grade Effective measuring range Force from 0.2% to 100% / from 0.4% to 100% Measuring accuracy the value ¡À1% / the value ¡À0.5% Tester resolution Max load: 1/200000, constant the resolution Load sensor Basic configuration sensor max load: one Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement ) Testing speed From 0.001 to 500mm/min Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2% Safety Electronic-limit protection Testing platform moving device Fast /slow( two speeds to control ),can jog Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation Overload protection Overload 10%, automatic protection fixture A set of tensile clamp Machine size 45x58x135cm (L*W*H) Motor Delta AC servo motor and drive Power supply 220V , 50HZ or according to the requirement Power 0.4KW ( depending on different demand of force,using different motor) weight About 75KG Unit KG,N,LB, TON can be exchanged.
Address: B-205, Vertex Vikas, Sir M.V.Rd., Andheri (E) , Mumbai - , India
Phone: 91-22-28215055
Fax:91-22-28215055

Equipment summary£º RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others. Main function: This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc. Main features: 1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission. 2. The whole control system is safe and high reliability. 3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves. 4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves. 5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves. 6. Has limit protection, overload protection, emergency stop and other safe protective functions. Applicable industry: It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested.. Technical parameters: Model RT-201A Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional ) Accurate grade 1grade / 0.5 grade Effective measuring range Force from 0.2% to 100% / from 0.4% to 100% Measuring accuracy the value ¡À1% / the value ¡À0.5% Tester resolution Max load: 1/200000, constant the resolution Load sensor Basic configuration sensor max load: one Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement ) Testing speed From 0.001 to 500mm/min Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2% Safety Electronic-limit protection Testing platform moving device Fast /slow( two speeds to control ),can jog Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation Overload protection Overload 10%, automatic protection fixture A set of tensile clamp Machine size 45x58x135cm (L*W*H) Motor Delta AC servo motor and drive Power supply 220V , 50HZ or according to the requirement Power 0.4KW ( depending on different demand of force,using different motor) weight About 75KG Unit KG,N,LB, TON can be exchanged.
Address: Shop No 36 Krishna Arcade Bajrakbati Road , Cuttack - , India
Phone: +91-0671-2322406
Fax:9437224997

Equipment summary£º RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others. Main function: This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc. Main features: 1. Adopt Panasonic servo motor,the beam moves up and down to test the load through the transmission. 2. The whole control system is safe and high reliability. 3. Microcomputer control the whole testing process, real-time dynamic display the load values, displacement values, deformation,testing speed and testing curves. 4. Microcomputer for data processing and analysis, testing results can be saved automatically, testing curves can be transferred out after the test, you can know the testing process through the testing curves, or compare with others curves, or amplify the curves. 5. the testing software of the Window, with strong processed capabilities of data and graphics, it can immediate print out a complete testing report and testing curves. 6. Has limit protection, overload protection, emergency stop and other safe protective functions. Applicable industry: It is widely used in wire and cable, hardware, electronic and electrical equipment, packaging, printing, medical equipment, auto parts, textiles and leather, clothing, shoes, rubber and plastic products, colleges and universities; research laboratories; inspection arbitration, technical supervision departments and many other industries, it is the basic equipment for quality management and physical tested.. Technical parameters: Model RT-201A Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional ) Accurate grade 1grade / 0.5 grade Effective measuring range Force from 0.2% to 100% / from 0.4% to 100% Measuring accuracy the value ¡À1% / the value ¡À0.5% Tester resolution Max load: 1/200000, constant the resolution Load sensor Basic configuration sensor max load: one Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement ) Testing speed From 0.001 to 500mm/min Accuracy of displacement measurement Tolerance:¡À0.5% / tolerance: ¡À0.2% Safety Electronic-limit protection Testing platform moving device Fast /slow( two speeds to control ),can jog Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation Overload protection Overload 10%, automatic protection fixture A set of tensile clamp Machine size 45x58x135cm (L*W*H) Motor Delta AC servo motor and drive Power supply 220V , 50HZ or according to the requirement Power 0.4KW ( depending on different demand of force,using different motor) weight About 75KG Unit KG,N,LB, TON can be exchanged.
Address: Interlabs Complex, Cross Road, No 8 , Ambala - , India
Phone: 2641604/2642604/2633304/2600056
Fax:2643484